Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Back-probe test lead in a wiring connector behind the dashboard, CAN bus fault finding in Uxbridge

NETWORK FAULTS · U-CODES · LOST COMMUNICATION

CAN bus fault finding in Uxbridge

Modern cars run on a network of modules that talk to each other over the CAN bus. When one wire, connector or module misbehaves, the whole car can light up like a Christmas tree. We find the single point that is bringing the network down.

Signs you need this

  • Lots of warning lights come on at once
  • Fault codes starting with U, such as 'lost communication with module'
  • Gauges dropping to zero or the dash going blank while driving
  • Random faults in unrelated systems
  • The car won't start and several modules don't respond to a scan

What we do

A scan tool shows which modules have stopped talking, but not why. CAN bus faults are tracked down with measurement.

  • We map which modules are online and which have dropped off the network
  • We check terminating resistance and voltage on CAN High and CAN Low
  • We look at the network signal on an oscilloscope to spot shorts, interference or a module corrupting the bus
  • We disconnect modules one by one, where needed, to find the one dragging the network down
  • We inspect the wiring and connectors in known trouble spots for that model, especially where water gets in

The fix might be a wiring repair, a connector, or a module repair or replacement, which we can code to the car.

Makes covered

  • Volkswagen
  • Audi
  • Skoda
  • Seat
  • BMW
  • Mini
  • Mercedes-Benz
  • Peugeot
  • Citroën
  • Vauxhall
  • Ford

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

What is a CAN bus fault?

It is a fault on the network the car's modules use to talk to each other. One bad wire or module can stop several systems working at once.

Why does my car have so many warning lights?

When modules can't communicate, each one logs its own fault, so a single network problem can show up as many different lights.

Do I need a new ECU?

Not usually. Most network faults turn out to be wiring, connectors or water damage. We prove the cause before recommending any module.

How is CAN bus work priced?

It starts with a diagnostic check at £120. Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work. The repair is priced and agreed with you before we continue.

Related services