Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Body control module board under a microscope, BCM repair and coding in Uxbridge

LIGHTS · LOCKING · WIPERS · COMFORT

Body control module repair and coding in Uxbridge

BCM (BSI) repair in Uxbridge. The body control module runs most of the comfort electrics: lighting, central locking, wipers, windows and the alarm, and on many cars part of the immobiliser too. Different makes give it different names (BSI on Peugeot and Citroën, SAM on Mercedes, FRM or FEM on BMW, GEM on Ford, UCH on Renault), but the job and the symptoms are similar.

Signs you need this

  • Several unrelated electrical faults at once
  • Lights, wipers or indicators working on their own
  • Central locking or alarm faults
  • Battery drain from a module that won't go to sleep
  • Problems after water got into the cabin

What we do

We scan every module, then test the BCM's supplies, earths, network lines and outputs, because a wiring or fuse fault can look exactly like a failed module. Only when the module itself is proven faulty do we recommend repair or replacement.

Where the BCM is at fault, there are three routes:

  • Component-level repair of your original board, which keeps all your car's settings and is often the best value
  • Cloning your original data into a matching replacement, so lights, locking and keys work as before
  • Coding a new BCM to your car's options and matching it to the immobiliser where required

We also look for the root cause, very often water ingress or a voltage problem, so the new or repaired module doesn't fail the same way.

Common BCM faults by make:

  • Peugeot and Citroën BCM (BSI): wipers or lights on by themselves, battery drain, communication faults
  • Mercedes SAM: water damage, lighting and wiper faults
  • BMW FRM and FEM: lights and windows failing, often after a battery change
  • Ford GEM and BCM: central locking, indicators and alarm faults
  • Renault UCH: keycard and starting faults
  • VW Group comfort modules: locking, lighting and battery drain

A typical case: wipers that start on their own and a battery that goes flat overnight. The cause is often a body control module that won't go to sleep after moisture has reached the board. We confirm it on the bench, repair the board and seal the source of the water.

Initial computer diagnostic check is £120. Deeper testing, if needed, is charged separately and agreed with you first. The repair is quoted before any work starts, and repairs carry a 3-month warranty.

Module repair and cloning are done at our workshop at 7 Lees Parade, Uxbridge UB10 0PQ. We can diagnose at your home or work across Uxbridge, Hillingdon, Ruislip, Hayes and West London, and arrange recovery if the car can't be driven.

Makes covered

  • Volkswagen
  • Audi
  • BMW
  • Mercedes-Benz
  • Peugeot
  • Citroën
  • Vauxhall
  • Ford
  • Renault
  • Fiat

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

Is BSI the same as BCM?

Yes. BSI is the name Peugeot and Citroën use for their body control module. SAM (Mercedes), FRM or FEM (BMW), GEM (Ford) and UCH (Renault) are other makers' versions.

Should I repair or replace my BCM?

Repair keeps all your car's settings and is often the best value when the fault is on the board. Where the board is beyond repair, we clone your data into a matching replacement.

Will a second-hand BCM work in my car?

Rarely on its own. It usually needs cloning from your original or coding to your car.

Do I need new keys after a BCM change?

Not usually. Because we clone your original data, your existing keys normally keep working. If the original can't be read, the new module is coded and matched to your keys.

Why did my BCM fail?

Water ingress and voltage spikes are the most common causes. We check for both.

How much does BCM repair cost?

Initial computer diagnostic check is £120. Deeper testing, if needed, is charged separately and agreed with you first. The repair is quoted before any work starts.

Related services

Related guides