
REPLACEMENT ECU · SAME KEYS · NO DEALER VISIT
Engine ECU cloning in Uxbridge
ECU cloning in Uxbridge. If your engine ECU has failed, a replacement won't start the car until it has your car's immobiliser data and software. Cloning transfers both from your old ECU, so there is no need for new keys or a trip to the dealer.
Signs you need this
- The car cranks but won't start and the ECU doesn't communicate
- Engine ECU confirmed faulty and beyond repair
- Water or fire damage to the ECU
- A used ECU has been bought for the car
What we do
First we confirm the ECU really has failed. Power supply, earth and CAN bus faults can make a healthy ECU look dead, and replacing a good ECU doesn't fix a wiring fault.
Then we read the original ECU. Depending on the unit, that is done through the diagnostic socket, on the bench, or directly from the processor and memory chips. The immobiliser data, VIN, software and adaptations are written to the replacement, which is then fitted, and we check it starts and runs correctly and clear any stored faults.
If the original can't be read, the replacement can be coded and matched to the car instead.
Repair, clone or replace?
- Repair: where the fault is a component on the board, we may be able to repair your original ECU
- Clone: a matching replacement gets an exact copy of your original data
- Replace and code: a new unit is coded and matched to the car where cloning isn't possible
We clone engine ECUs on VW Group, BMW, Mini, Mercedes-Benz, Ford, Peugeot, Citroën and Vauxhall, and also gearbox (TCU), ABS, immobiliser and instrument cluster units.
ECU families we work with
- Bosch: EDC15, EDC16, EDC17, MED9, MED17, ME17, MEVD17, MG1 and MD1
- Continental and Siemens: SID201, SID206, SID208, SID310, SID807, Simos 8, Simos 10, Simos 12, Simos 18, PCR2.1 and MSD80/MSD81
- Delphi: DCM3.4, DCM3.5, DCM6.2 and DCM7.1
- Denso, Magneti Marelli (MJD, IAW) and Valeo units on many models
- Gearbox units including VW Group DSG (DQ200, DQ250, DQ381), ZF 6HP and 8HP, Getrag and Aisin
Not every unit can be read the same way. Send us the part number from the ECU label and we will confirm before you book.
A typical case: a car that cranks but won't start after water reached the ECU. We confirm the ECU isn't communicating because it has failed, not because of a wiring fault, read the original data on the bench and write it to a matching replacement.
The clone is an exact copy of your original software. We never alter mileage, remove emissions equipment or bypass an immobiliser.
Initial computer diagnostic check is £120. Deeper testing, if needed, is charged separately and agreed with you first. The cloning work is quoted before it starts, and repairs carry a 3-month warranty. ECU work is done at our workshop at 7 Lees Parade, Uxbridge UB10 0PQ; we arrange recovery if the car can't be driven, from across Uxbridge, Hillingdon, Ruislip, Hayes and West London.
Makes covered
- Volkswagen
- Audi
- Skoda
- Seat
- BMW
- Mini
- Mercedes-Benz
- Peugeot
- Citroën
- Vauxhall
- Ford
What a diagnostic costs
- Diagnostic Check – £120
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
Priced after diagnostic check, agreed with you before any further work.
Basic Diagnostic Check — what the check covers, and what happens after it.
A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.
How We Repair Your Car
- 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
- 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
- 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.
Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.
Diagnose properly. Repair once.
Frequently asked questions
Can I fit a used ECU from a scrapyard?
Yes, if it is a compatible part number and it is cloned with your original's data. On its own it won't start the car.
Is my ECU definitely broken?
Not always. We check its power, earths and network first, as these often cause a no-communication fault.
Can you repair my ECU instead of replacing it?
Sometimes. Where the fault is a component on the board, repair keeps everything original. We tell you once we have tested the unit.
Will my keys still work?
Yes. Cloning copies the immobiliser data, so the car starts with your existing keys.
Which ECUs can you clone?
Most Bosch EDC16, EDC17, MED17, MG1 and MD1 units, Continental and Siemens SID and Simos units, Delphi DCM units, plus many Denso, Magneti Marelli and Valeo ECUs. Send us the part number and we will confirm.
How long does it take?
It depends on the ECU type and how it has to be read. We will tell you once we have seen the unit.
How much does ECU cloning cost?
Initial computer diagnostic check is £120. Deeper testing, if needed, is charged separately and agreed with you first. The cloning work is quoted before it starts.
Related services
- Gearbox (TCU) cloning
- ECU mail-in service
- MG1/MD1 ECU cloning
- Bosch MG1/MD1 ECU unlocking & repair
- Gearbox control unit (TCU) repair
- ECU replacement & coding
- Cloning
- Instrument cluster cloning
- Car won't start
- Module repair & programming
- Water ingress electrical faults
- Immobiliser cloning
- Body control module cloning
- ABS module cloning & coding