
PLUG-IN REPLACEMENTS · SAME KEYS · SAME SETTINGS
ECU and module cloning in Uxbridge
When a module fails, cloning is often the quickest way to get the car back on the road. We read the data from your original unit and write it to a replacement, so the new one works as if it had always been in the car, with your existing keys.
Signs you need this
- Your ECU, gearbox unit, BCM (BSI) or cluster has failed and can't be repaired
- You've bought a used replacement module
- A dealer has quoted a new module plus programming
- A replacement module was fitted and the car still won't start
What we do
Cloning and coding are different jobs:
- Cloning copies everything from your old module: immobiliser data, VIN, coding and adaptations. The replacement behaves exactly like the original.
- Coding configures a new or virgin module for your car through diagnostic software. It is needed when there is no readable original.
Cloning only works if we can read the data from your original unit, even if it is faulty. We check that first, on the bench where necessary.
Modules we clone
- Engine ECUs, including Bosch MG1 and MD1 units
- Gearbox control units (TCU), including DSG and ZF units
- Body control modules: BCM (BSI), SAM, FRM, FEM/BDC, GEM, UCH and comfort modules
- Instrument clusters, with the recorded mileage transferred unchanged
- Immobiliser units, BMW CAS, FEM and BDC
- ABS units
What we need from you
- Your original module, even if it has failed
- The replacement, with a matching part number and hardware version (send us both part numbers before you buy and we will check)
- The V5C logbook and photo ID with a matching name, as cloning involves immobiliser data
Can't bring the car in? Modules can be posted to us with our ECU and module mail-in service.
We copy your car's own data. We never turn an immobiliser off, remove emissions equipment or change mileage.
Makes covered
- Volkswagen
- Audi
- Skoda
- Seat
- BMW
- Mini
- Mercedes-Benz
- Peugeot
- Citroën
- Vauxhall
- Ford
- Renault
What a diagnostic costs
- Diagnostic Check – £120
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
Priced after diagnostic check, agreed with you before any further work.
Basic Diagnostic Check — what the check covers, and what happens after it.
A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.
How We Repair Your Car
- 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
- 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
- 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.
Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.
Diagnose properly. Repair once.
Frequently asked questions
What is the difference between cloning and coding?
Cloning copies all the data from your old module to the replacement. Coding sets up a new module from scratch through diagnostic software.
Will my keys still work?
Yes. A cloned module carries your car's immobiliser data, so your existing keys keep working.
Does the replacement have to be the same part number?
Usually the same or a compatible hardware version. Send us the part numbers before you buy and we will check.
What if my old module is completely dead?
We can often still read its memory on the bench. If not, the replacement is coded and matched instead.
Good to know
When an instrument cluster is cloned, the recorded mileage is transferred unchanged. We never alter mileage.