Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Engine control unit on an anti-static bench with programming leads attached, ECU and module repair and programming in Uxbridge

REPAIR · REPLACE & CODE · CLONE

ECU & module repair and programming in Uxbridge

ECU and module repair for all makes, from VW Group, BMW and Mercedes-Benz to Ford, Peugeot, Citroën, Renault and Land Rover. When a control module fails, the main dealer usually quotes a new one plus programming. Often there is a cheaper and quicker route. We repair modules at component level, and replace, code or clone them in-house.

Signs you need this

  • A dealer has told you a module needs replacing
  • Electrics stopped working after water got into the car
  • The car won't start and a module isn't responding to diagnostics
  • Lights, windows or locking failed after a battery change
  • A second-hand module has been fitted and doesn't work

What we do

There are three ways to deal with a failed module, and the right one depends on the fault:

  • Repair: we fix the original unit at component level, for example a failed power supply, a cracked solder joint or a damaged track. It keeps the car's original coding and keys.
  • Replace and code: a new or used unit is programmed and coded to your car's VIN, options and immobiliser.
  • Clone: data from your original unit is copied to a replacement so it drops straight in, with the same keys and settings.

We use manufacturer dealer-level software along with bench programming equipment, so most module work stays in-house.

We do not offer immobiliser bypass or deletion. Immobiliser work is repair and matching only.

All makes

Modules by make

Find your car, then the module. Each page explains the usual symptoms and whether a repair, a replacement with coding or a clone is the right fix. Not listed? We work on modules for most other makes too, so ask us.

Not near Uxbridge? Post the unit to us with the UK-wide mail-in service.

Makes covered

  • Peugeot
  • Citroën
  • DS
  • Vauxhall
  • Volkswagen
  • Audi
  • Skoda
  • Seat
  • BMW
  • Mini
  • Mercedes-Benz
  • Ford
  • Renault

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

Is it better to repair or replace a module?

It depends on the fault. If the board can be repaired reliably, repair is usually cheaper and keeps the original coding. If it is badly damaged, we replace and code it or clone it.

Can I buy a used module online and have you fit it?

Often, yes, but used modules usually need coding or cloning to work in your car. Check the part number with us before you buy.

Do you need the whole car or just the module?

For diagnosis we need the car. Some repairs can be done on the bench with only the module. Ask us before sending anything.

Will you bypass my immobiliser?

No. We repair and match immobiliser components so the car's security works as designed.

Good to know

We do not bypass, delete or disable immobilisers or other security systems. Immobiliser work is repair and matching only.

In this section

Related services