Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Body control unit with its cover off showing the circuit board under a magnifier lamp, Peugeot and Citroën BSI repair in Uxbridge

STELLANTIS BSI SPECIALISTS

Peugeot & Citroën BSI repair and programming in Uxbridge

The BCM (BSI, short for Built-in Systems Interface) is the main body computer on Peugeot, Citroën and DS cars, and on newer Vauxhalls built on the same platforms. It controls lighting, locking, wipers and the immobiliser, and links most of the car's other modules. When it fails, the car can behave in some very strange ways. BCM (BSI) work is what we are known for.

Signs you need this

  • The car won't start, or the immobiliser light stays on
  • Wipers, indicators or lights work on their own or not at all
  • Central locking or the alarm misbehaves
  • The dashboard is dead or shows several unrelated faults
  • The problems started after heavy rain or a water leak inside the car
  • A replacement BCM (BSI) has been fitted and the car still won't run

What we do

BCM (BSI) faults are often caused by water getting in, typically from blocked scuttle drains or a leak around the windscreen, or by a voltage spike from jump-starting or a failing battery.

We start with a full scan on the Stellantis diagnostic platform, then check the BCM (BSI)'s power supplies, earths and network connections before blaming the unit itself.

If the BCM (BSI) has failed, there are three routes:

  • Repair: component-level repair of the original board, which keeps your keys and coding
  • Clone: your original BCM (BSI)'s data is copied to a replacement unit so it works with your existing keys
  • Replace and code: a new BCM (BSI) is programmed to your VIN, configured for your car's options and matched to the immobiliser and keys

We also fix the cause, such as blocked drains or a corroded connector, so the new or repaired unit doesn't fail the same way.

Makes covered

  • Peugeot
  • Citroën
  • DS
  • Vauxhall (Stellantis platforms)

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

What does a BCM (BSI) do?

It is the main body control unit. It manages lighting, locking, wipers, the immobiliser and the communication between many other modules.

Can a BCM (BSI) be repaired?

Often, yes. Many failures are a damaged component or corrosion that can be repaired at board level. If it is beyond repair, we clone or replace and code it.

I bought a used BCM (BSI). Will it work?

Not on its own. A used BCM (BSI) carries the donor car's immobiliser and configuration. It has to be cloned from your original unit, or virginised and coded to your car.

Why did my BCM (BSI) fail?

Water ingress is the most common cause, followed by voltage problems. We check for both so the repair lasts.

Which cars have a BCM (BSI)?

Most Peugeot, Citroën and DS models from around 2000 onwards, and newer Vauxhalls built on Stellantis platforms.

Related services