Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
ABS pump and its separated control unit with the circuit board exposed on a workbench, ABS module repair and coding in Uxbridge

ABS · ESP · BRAKE ASSIST

ABS module repair and coding in Uxbridge

The ABS module controls anti-lock braking, traction and stability control and, on many newer cars, brake assist. When it fails you lose some of those safety systems, and on some cars the brakes feel very different. We diagnose the unit properly, then repair or replace and code it.

Safety notice

If a red brake warning light is on, or the brakes feel hard or different, stop driving when it is safe to do so and call us on 07494 227487. Do not drive the car to us.

Signs you need this

  • ABS, traction control or ESP warning lights stay on
  • A 'brake system fault' or 'stop carefully' message
  • The brake pedal feels hard or lacks assistance
  • Speedometer or cruise control problems alongside ABS lights
  • Fault codes return immediately after clearing

What we do

We read the ABS/ESP unit on dealer-level software and check the wheel speed sensors, wiring and power supply first. Sensor and wiring faults are more common than a failed module.

If the module itself has failed, we can repair the electronic control unit or fit a replacement. In either case it then needs coding to the car, along with any calibration and basic settings the system requires, such as steering angle and the yaw/acceleration sensor.

A well-known example is Audi fault C123EF0, where the ABS unit locks out the hydraulic brake assist after repeated brake booster faults. That repair means fixing the original vacuum or sensor fault, replacing the booster pressure sensor and dealing with the ABS unit itself. Clearing the code alone won't fix it.

Makes covered

  • Audi
  • Volkswagen
  • Skoda
  • Seat
  • BMW
  • Mercedes-Benz
  • Ford
  • Peugeot
  • Citroën
  • Vauxhall

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

Is it safe to drive with the ABS light on?

The normal brakes usually still work, but anti-lock and stability control may not. If the red brake light is also on or the pedal feels different, do not drive. Call us.

Do I need a new ABS pump?

Not always. Many faults are sensors or wiring, and many ABS control units can be repaired. We confirm the cause first.

Does a replacement ABS module need coding?

Yes. It has to be coded to the car, and many systems also need calibration and basic settings afterwards.

What is Audi fault C123EF0?

It means the ABS/ESP unit has switched off hydraulic brake assist after repeated brake booster faults. It needs a proper repair, not just a code clear.

Related services

Related fault codes