Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Oscilloscope probes on an engine sensor connector, oscilloscope diagnostics in Uxbridge

SEE THE SIGNAL, NOT JUST THE CODE

Oscilloscope diagnostics in Uxbridge

A fault code tells you which circuit the car is unhappy with, not why. An oscilloscope lets us see the actual signals from sensors, injectors and the CAN bus to prove where the fault is.

Signs you need this

  • Parts replaced but fault still there
  • Fault code points to a sensor that tests fine
  • CAN bus or communication faults
  • Misfires with no clear cause

What we do

We connect the scope to the circuit in question and compare the signal with known-good patterns: crank and cam sensors, injectors, ignition, CAN bus and more. It proves the fault before any parts are bought.

Makes covered

  • All makes

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

Why not just replace the sensor?

Because the sensor is often fine. The scope shows if it is the wiring, the sensor or the ECU.

What is an oscilloscope used for?

It shows a sensor or wiring signal as it happens, so we can see faults a code reader can't, such as a signal dropping out for a split second.

When do I need oscilloscope testing?

When the fault codes don't explain the problem, when parts have been replaced without a fix, or when the fault is intermittent.

How is oscilloscope testing charged?

It is deeper testing after the £120 initial check. It is charged separately and always agreed with you first.

Related services