Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan

FAULT CODE

Fault code C123EF0

C123EF0 is stored by the ABS/ESP unit when the hydraulic brake boost (brake assist) system has reported a fault too many times, so the unit switches brake assist off. It is a VW Group fault: mainly Audi, and also Volkswagen, SEAT, Skoda and Porsche models from around 2015 with Bosch ESP9-family ABS units.

IS IT SAFE TO DRIVE?

Do not drive

Do not drive. With hydraulic brake assist switched off, the brakes need much more pedal effort and stopping distances can increase. Have the car checked before using it. 07494 227487

ABS unit and brake servo in a VW Group engine bay, fault code C123EF0 (hydraulic brake booster limit exceeded)

Supplied definitions

This is a seven-character identifier. The base code is C123E and the final characters F0 are the F0 - manufacturer-specific failure type.

Meanings for this code vary by manufacturer. Each manufacturer definition is listed separately below.

AUDI / VW / BENTLEY (VAG)

Hydraulic Brake Booster - Limit Value Reached. The ABS/ESP unit (Bosch ESP9 family) switches off hydraulic brake assist after repeated brake booster vacuum or pressure faults. Fix the underlying vacuum/sensor fault, then reset and adapt the ABS unit with dealer-level software, or repair/replace, code and calibrate it.
Chassis (ABS, ESP, steering, suspension) · Workshop note (researched)

Definitions are reproduced as supplied by the data source. They describe what the code means, not what is wrong with your particular car.

What it means

C123EF0 is stored by the ABS/ESP unit when the hydraulic brake boost (brake assist) system has reported a fault too many times, so the unit switches brake assist off. It is a VW Group fault: mainly Audi, and also Volkswagen, SEAT, Skoda and Porsche models from around 2015 with Bosch ESP9-family ABS units.

Dashboard message

“Brake system fault - stop carefully”

Typical symptoms

  • "Brake system fault - stop carefully" message
  • ABS and traction control lights on
  • Red brake warning light
  • Brake pedal feels hard or lacks assistance
  • The code returns straight after clearing

Safety guidance

Do not drive

Do not drive. With hydraulic brake assist switched off, the brakes need much more pedal effort and stopping distances can increase. Have the car checked before using it.

This guidance applies to: VW Group cars from around 2015 with Bosch ESP9-family ABS units: Audi A3, A4/S4 (B9), A5/S5, A6, A7, A8, Q3, Q5/SQ5, Q7/SQ7, Q8; VW Golf Mk7/7.5/8, Passat, Tiguan, Arteon, T-Roc, Touran, Touareg; SEAT Leon, Ateca, Tarraco, Arona; Skoda Octavia, Superb, Kodiaq, Karoq, Scala, Kamiq; Porsche Cayenne.

This advice is written for the vehicles above. A code lookup on its own cannot confirm that your vehicle is safe to drive - if you are unsure, stop somewhere safe and call the garage.

Common causes

  • An earlier brake booster vacuum or pressure fault left unrepaired: split hoses, leaking pipes or non-return valve
  • Weak or failing vacuum pump
  • Faulty brake booster pressure or vacuum sensor
  • Brake servo not holding or supplying assistance
  • Repeated brake boost compensation events until the ABS unit reaches its limit

How we diagnose and fix it

We first find and fix the vacuum, sensor or servo fault that triggered it, otherwise the code comes back. Depending on the car and the unit, the ABS module can then be reset and adapted with dealer-level software, or it needs repairing or replacing, coding and calibrating. We tell you which before any work. Every repair is priced and agreed with you first.

Price guidance

Initial computer diagnostic check is £120. Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work. Once the cause is found, the repair is quoted before any work starts, and any small extra parts a bigger repair needs are explained to you first. No surprises.

Frequently asked questions

Can I just clear C123EF0?

Usually not with a normal code reader. Once the ABS unit has reached its limit the fault often comes straight back until the cause is fixed and the unit is reset with dealer-level software or repaired.

Do I need a new ABS pump?

Not always. Many units can be reset or repaired. We diagnose the cause first and tell you the options before any work.

Which cars get C123EF0?

VW Group cars from around 2015 with Bosch ESP9-family ABS units: mainly Audi (A3, A4, A5, A6, A7, A8, Q3, Q5, Q7, Q8), plus VW Golf, Passat, Tiguan, Arteon, T-Roc, Touran and Touareg, SEAT Leon, Ateca, Tarraco and Arona, Skoda Octavia, Superb, Kodiaq, Karoq, Scala and Kamiq, and Porsche Cayenne. We confirm for your car when we diagnose it.

Also searched as: C123EFO · C123E F0 · C123E-F0 · hydraulic brake servo limit reached · Audi brake system fault stop carefully · VW brake system fault stop carefully

Related services

Source: Inscripta Autotech, checked against published workshop write-ups (Dudley Auto Service, Essex Recons, ECU Testing), 31 Oct 2026.. Last reviewed 2026-11-04.

Look up another code

Get this checked

A fault code on its own does not confirm a diagnosis, and a code lookup cannot tell you whether your vehicle is safe to drive. Book a diagnostic and we will test the car in person.

How diagnosis is charged

  1. Initial computer diagnostic check: £120.
  2. Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
  3. Once the cause is found, we quote the repair and only carry it out once you agree.

No surprises: bigger repairs sometimes need small extra parts to finish the job to a high standard. We always tell you about these before they are fitted.

A booking request is not a confirmed appointment: the garage confirms availability with you, and any further work is agreed with you before it starts.

Send us your reg and fault code

Tell us the code and your registration and we will get back to you.

Fault code: C123EF0

This is a request, not a confirmed appointment. The garage will confirm availability with you.

Let’s get you back on the road.

SAME ROADS  A BRIGHTER TOMORROW