Monthly service plan: spread the cost over 12 months•Servicing, brakes and MOT in one plan•£5 off tyres and free puncture repairs for members•
See the plan
Body domain controller under the dashboard, BMW FEM and BDC repair in Uxbridge

F-SERIES FEM · G-SERIES BDC

BMW FEM and BDC repair and programming in Uxbridge

On F-series BMWs the front electronic module (FEM), and on G-series the body domain controller (BDC), took over from the old CAS and FRM. They control the immobiliser, keys, lighting and central gateway functions, so a fault can stop the car starting altogether.

Signs you need this

  • Key not detected or no start
  • Several body electrics failing at once
  • Gateway or communication faults across many modules
  • Faults after a battery change or jump-start
  • A replacement FEM or BDC needs programming

What we do

We read the car on BMW dealer-level software and check power, earths and network lines to the module first.

What we can do:

  • Repair the original FEM or BDC where the fault is on the board
  • Program and code a replacement module to the vehicle order
  • Key learning on FEM, BDC, BDC03 and BCP (2020 onwards G-series), including all keys lost
  • Synchronise the engine ECU (ISN) so the car starts

Makes covered

  • BMW F-series
  • BMW G-series
  • Mini F-series

What a diagnostic costs

  • Diagnostic Check – £120
  • Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.

Priced after diagnostic check, agreed with you before any further work.

Basic Diagnostic Check — what the check covers, and what happens after it.

A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.

How We Repair Your Car

  1. 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
  2. 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
  3. 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.

Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.

Diagnose properly. Repair once.

Frequently asked questions

Is a FEM replacement a big job?

It needs programming, coding and key learning, but we do all of it in-house rather than sending the car to a dealer.

Can you add a key on a G-series BMW?

On many models, yes, including the 2020 onwards BDC03 and BCP cars. We confirm your car by VIN first.

What are the signs of a FEM or BDC fault?

Lights, windows, locking or the key not working, often after a battery change or water ingress.

How much is FEM or BDC programming?

The initial computer diagnostic check is £120. The programming work is quoted before it starts.

Related services