
NEW OR USED ECU · MATCHED TO YOUR CAR
Replacement ECU coding in Uxbridge
A replacement engine ECU, new or second-hand, will not run your car straight out of the box. It has to be told which car it is in, which options are fitted and which keys are allowed to start it. We do that matching in-house.
Signs you need this
- A used ECU has been fitted and the car cranks but won't start
- Immobiliser light stays on after an ECU swap
- A new ECU from the dealer needs programming
- Warning lights and limp mode after a replacement unit was fitted
What we do
First we confirm the original ECU really has failed. A lot of 'dead' ECUs turn out to be a power supply, earth or CAN bus fault.
If it has failed, there are two routes:
- Clone: copy the data from your original ECU onto the replacement, so it behaves exactly like the old one. This needs a readable original and a matching part number.
- Code and match: where the original can't be read, the replacement is virginised where needed, programmed with the right software, coded to your VIN and options, and matched to the immobiliser and keys.
Afterwards we run any adaptations the engine needs, such as throttle and injector values, clear stored faults and road test the car.
Makes covered
- Volkswagen
- Audi
- Skoda
- Seat
- BMW
- Mercedes-Benz
- Peugeot
- Citroën
- Vauxhall
- Ford
What a diagnostic costs
- Diagnostic Check – £120
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
Priced after diagnostic check, agreed with you before any further work.
Basic Diagnostic Check — what the check covers, and what happens after it.
A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.
How We Repair Your Car
- 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
- 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
- 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.
Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.
Diagnose properly. Repair once.
Frequently asked questions
Can I buy a used ECU and have you code it?
Often, yes. Send us the part number of your old unit and the one you plan to buy first, so we can confirm they are compatible.
Is cloning or coding better?
Cloning is usually quicker and keeps everything the same. Coding is used when the original ECU can't be read.
Will I need new keys?
Not normally. The replacement is matched to your existing keys.