
AUTOMATIC & DSG GEARBOX ELECTRONICS
Gearbox control unit (TCU) repair in Uxbridge
Many automatic gearbox problems are electronic, not mechanical. The transmission control unit (TCU) reads sensors and drives the solenoids that change gear. When it fails, a gearbox that is mechanically fine can refuse to shift or lock itself into one gear.
Signs you need this
- Gearbox fault message on the dash
- Stuck in one gear or in limp mode
- Harsh, delayed or flared gear changes
- No reverse or no drive engagement
- Gearbox faults returning after a fluid change
What we do
We read the gearbox and engine modules together and look at live data: solenoid currents, speed sensor signals, temperature and supply voltage. That tells us whether the fault is the TCU, its wiring, a sensor or genuinely mechanical.
Where the TCU is at fault we can:
- Repair it at component level, keeping its data and adaptations
- Clone a replacement unit from your original (matching part number needed)
- Code a new unit and run the gearbox adaptation procedure
Gearboxes we commonly see include ZF 6HP and 8HP, Mercedes 7G-Tronic (conductor plate) and Ford PowerShift units.
Makes covered
- BMW
- Mercedes-Benz
- Volkswagen
- Audi
- Ford
- Land Rover
- Jaguar
What a diagnostic costs
- Diagnostic Check – £120
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
Priced after diagnostic check, agreed with you before any further work.
Basic Diagnostic Check — what the check covers, and what happens after it.
A booking request is not a confirmed appointment: the garage confirms availability with you. Call 07494 227487 if the problem may be urgent.
How We Repair Your Car
- 01Computer DiagnosticsWe scan your vehicle’s systems for fault codes and live data.
- 02Deeper DiagnosisCircuit testing and investigation to find the real cause, not just the symptom.
- 03RepairWe fix the confirmed fault, then test to make sure it’s sorted.
Mechanical jobs follow the same process, with the right checks for the fault, such as a pressure test and visual inspection for coolant leaks.
Diagnose properly. Repair once.
Related warning lights
Frequently asked questions
Does a gearbox fault always mean a new gearbox?
No. Many faults are the control unit, a sensor or wiring. We prove which before anything is replaced.
Do gearboxes need adapting after repair?
Usually. Most automatics need an adaptation or learning procedure after a TCU repair or replacement, which we carry out.
Can I drive in limp mode?
Gently and only to get to a garage. Avoid motorways if it won't change up.