Tyre pressure (TPMS) Warning Light – What It Means | Uxbridge
Tyre pressure (TPMS)
SOLID: check and adjust pressures, then reset. FLASHING at start-up then solid: a sensor fault.
WHAT IT MEANS
Solid means at least one tyre is below its correct pressure. If it flashes for a while when you start the car and then stays on, the system has a fault, usually a sensor with a flat battery.
CAN I KEEP DRIVING?
Solid: yes, slowly to the nearest air line to check the pressures. If a tyre is flat or damaged, don't drive on it.
WHAT TO DO NOW
- 1Check whether the light is solid or flashes at start-up.
- 2Solid: check all four tyres and set them to the pressures on the door pillar or fuel flap, then reset the system.
- 3Flashing then solid: book a TPMS check.
- 4If a tyre is flat or damaged, don't drive on it. Book our emergency mobile tyre callout.
WHAT WE DO
- STEP 1We check every tyre and read all four sensors with a TPMS tool.
- STEP 2We find the faulty sensor, or set the pressures and reset the system.
- STEP 3We replace and program sensors at the agreed price.
- Solid light: pressure adjust and TPMS reset – £5
- Flashing at start-up: TPMS diagnosis check – £30
- TPMS sensor – £70 each fitted
- TPMS sensors – £250 for a set of 4
Any repair is priced and agreed with you before work starts.
Questions about the tyre pressure (tpms) light
How much is a TPMS reset?
Adjusting the pressures and resetting the system is £5. If the light flashes at start-up, a TPMS check is £30.
Will a TPMS light fail the MOT?
On cars first registered from 2012, a TPMS light that stays on is an MOT failure.
Symbols and meanings vary by make and model — check your vehicle handbook. This guide gives general advice only and isn't a diagnosis. If in doubt, stop safely and get help.