
1:1 CLONE · SAME KEYS · PART NUMBER CHECKED
MG1 and MD1 ECU cloning to a donor unit
This page is for drivers and garages whose Bosch MG1 or MD1 engine ECU has failed and needs replacing. A replacement ECU won't start the car on its own, because the immobiliser data is stored inside the original unit. We copy your original's full software and data onto a matching donor, so the car recognises it and your keys keep working.
Signs you need this
- The engine ECU has been confirmed faulty and can't be repaired
- You have bought a used ECU and the car won't start with it
- The original ECU still reads on the bench but the board is damaged
- A dealer has quoted a new ECU plus coding
What we do
What a 1:1 clone is
A 1:1 clone copies the full software and data from your original ECU onto a donor of the same hardware and software family. The immobiliser data comes across with it, so the car recognises the donor as its own. In most cases no extra coding is needed.
Choosing a matching donor
The donor has to belong to the same hardware and software family as your original. Send us both Bosch part numbers before you buy a donor and we will check they match. If they don't, we tell you before any work is done.
What to send
- Your original ECU, even if it is faulty
- The donor ECU, or ask us to source one
- The Bosch part numbers from both labels
- The reg and, if you have it, the VIN
We repair and restore the vehicle's own ECU data on a replacement. We never turn an immobiliser off, remove emissions equipment or change mileage.
How it works
- 1Send us the Bosch part numbers of the original and the donor. We confirm they match and how the units have to be read.
- 2We check ownership: V5C logbook and photo ID with a matching name, or for trade jobs your garage details, the reg or VIN and the end customer's V5C on request.
- 3We take a full backup of the original ECU before anything else.
- 4We read the original on the bench and write its software and data to the donor.
- 5We test the clone and confirm the result before it is fitted or posted back.
Makes covered
- Volkswagen
- Audi
- Skoda
- Seat
- Cupra
- BMW
- Mini
- Mercedes-Benz
- Peugeot
- Citroën
- Vauxhall
- Ford
Price
Price on request
Confirmed after we check the part number. No work starts until you agree the quote.
Frequently asked questions
Will the car start with my existing keys?
Yes. The immobiliser data is stored inside the ECU, and a 1:1 clone copies it to the donor along with the software, so your keys keep working.
Can I buy any used ECU for my car?
No. It must be the same hardware and software family as your original. Send us both part numbers before you buy and we will check.
Does the clone need coding afterwards?
In most cases, no. A 1:1 clone carries the original coding and adaptations. If anything needs setting up, we tell you first.
What if my original ECU won't read?
Many units can still be read on the bench, and some need the case opened. If the original can't be read, we explain the options before going further.
How long does cloning take?
In most cases 2 to 3 working days after we receive both units. Pricing is on request and confirmed after the part-number check.
Good to know
Ownership is checked before any immobiliser or ECU security work. Drivers: V5C logbook plus photo ID with a matching name. Trade customers: garage name, contact, the reg or VIN, and the end customer's V5C on request.