FAULT CODE
Fault code P0700
P0700 means the gearbox control unit has stored its own fault and asked the engine computer to switch on the engine light. The real fault code is stored in the gearbox control unit.
IS IT SAFE TO DRIVE?
Drive with caution
In limp mode the car may hold one gear and accelerate slowly. Drive carefully and get it checked. 07494 227487

Supplied definitions
GENERIC - SAME MEANING ON ALL MAKES
- Transmission Control System (MIL Request)
- Powertrain (engine, gearbox, emissions) · Standard definition
- Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages
- Powertrain (engine, gearbox, emissions) · Likely causes (brand-specific notes)
A generic code carries the same meaning on all makes, but the underlying causes and the repair procedure can still vary from car to car.
Definitions are reproduced as supplied by the data source. They describe what the code means, not what is wrong with your particular car.
What it means
P0700 means the gearbox control unit has stored its own fault and asked the engine computer to switch on the engine light. The real fault code is stored in the gearbox control unit.
Typical symptoms
- Engine or gearbox light on
- Limp mode (stuck in one gear)
- Harsh or delayed gear changes
Safety guidance
Drive with caution
In limp mode the car may hold one gear and accelerate slowly. Drive carefully and get it checked.
This advice is written for the vehicles above. A code lookup on its own cannot confirm that your vehicle is safe to drive - if you are unsure, stop somewhere safe and call the garage.
Common causes
- Gearbox sensor or solenoid fault
- Low or degraded gearbox fluid
- Wiring or connector fault
- Gearbox control unit or mechatronic fault
How we diagnose and fix it
A generic code reader stops at P0700. We read the gearbox control unit itself to find the real fault, check live data and adaptations, and repair the cause.
Price guidance
Initial computer diagnostic check is £120. Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work. Once the cause is found, the repair is quoted before any work starts, and any small extra parts a bigger repair needs are explained to you first. No surprises.
Frequently asked questions
Why didn't my code reader show more?
P0700 is only a flag. The detailed code sits in the gearbox module, which needs a full-system scanner to read.
Also searched as: P 0700 · transmission control system
Related services
Source: SAE J2012 standard definition; written by Inscripta Autotech.. Last reviewed 2026-11-04.
Look up another code
Get this checked
A fault code on its own does not confirm a diagnosis, and a code lookup cannot tell you whether your vehicle is safe to drive. Book a diagnostic and we will test the car in person.
How diagnosis is charged
- Initial computer diagnostic check: £120.
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
- Once the cause is found, we quote the repair and only carry it out once you agree.
No surprises: bigger repairs sometimes need small extra parts to finish the job to a high standard. We always tell you about these before they are fitted.
A booking request is not a confirmed appointment: the garage confirms availability with you, and any further work is agreed with you before it starts.