FAULT CODE
Fault code P0303
P0303 means the engine computer has detected misfires in cylinder 3, pointing to a fault with a part serving that cylinder.
IS IT SAFE TO DRIVE?
Drive with caution
Drive gently. Stop hard acceleration if the engine light flashes, to protect the catalytic converter. 07494 227487

Supplied definitions
GENERIC - SAME MEANING ON ALL MAKES
- Cylinder 3 Misfire Detected
- Powertrain (engine, gearbox, emissions) · Standard definition
- Worn out spark plugs, ignition wires, coil(s), distributor cap and rotor (when applicable), Incorrect ignition timing, Vacuum leak(s), Low or weak fuel pressure, Improperly functioning EGR system, Defective Mass Air Flow Sensor, Defective Crankshaft and or Camshaft Sensor, Defective Throttle Position Sensor, Mechanical engine problems (i.e.—low compression, leaking head gasket(s), or valve problem
- Powertrain (engine, gearbox, emissions) · Likely causes (brand-specific notes)
A generic code carries the same meaning on all makes, but the underlying causes and the repair procedure can still vary from car to car.
Definitions are reproduced as supplied by the data source. They describe what the code means, not what is wrong with your particular car.
What it means
P0303 means the engine computer has detected misfires in cylinder 3, pointing to a fault with a part serving that cylinder.
Typical symptoms
- Uneven running or vibration
- Engine light on or flashing
- Poor acceleration
- Fuel smell from the exhaust
Safety guidance
Drive with caution
Drive gently. Stop hard acceleration if the engine light flashes, to protect the catalytic converter.
This advice is written for the vehicles above. A code lookup on its own cannot confirm that your vehicle is safe to drive - if you are unsure, stop somewhere safe and call the garage.
Common causes
- Ignition coil or spark plug on cylinder 3
- Injector fault on cylinder 3
- Wiring or connector fault
- Low compression on cylinder 3
How we diagnose and fix it
We confirm the misfire on live data, swap-test ignition parts, check injector and wiring, and compression-test where the parts check out.
Price guidance
Initial computer diagnostic check is £120. Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work. Once the cause is found, the repair is quoted before any work starts, and any small extra parts a bigger repair needs are explained to you first. No surprises.
Frequently asked questions
Why does the misfire only happen sometimes?
Coils often fail when hot or under load first. We can log data on a road test to catch it.
Also searched as: P 0303 · cylinder 3 misfire
Related codes
Related services
Source: SAE J2012 standard definition; written by Inscripta Autotech.. Last reviewed 2026-11-04.
Look up another code
Get this checked
A fault code on its own does not confirm a diagnosis, and a code lookup cannot tell you whether your vehicle is safe to drive. Book a diagnostic and we will test the car in person.
How diagnosis is charged
- Initial computer diagnostic check: £120.
- Deeper testing (oscilloscope, wiring and component tests) is not included: it is charged separately and agreed with you before any work.
- Once the cause is found, we quote the repair and only carry it out once you agree.
No surprises: bigger repairs sometimes need small extra parts to finish the job to a high standard. We always tell you about these before they are fitted.
A booking request is not a confirmed appointment: the garage confirms availability with you, and any further work is agreed with you before it starts.